Volumetric Pipettes, 1 mark, Class AS
- With Batch Certificate
- Compliance with DIN ISO 648 Standard
- Printed in amber colour
- Compliance with USP standard
- With Batch Certificate
Glassco volumetric pipettes are manufactured in compliance with DIN ISO 648 standards. These pipettes are calibrated to deliver (TD, EX) + 20° C . All volumetric pipettes are calibrated by automatic machine and then the final quality check is done on the quality control centre. The volumetric pipettes come in AS Class with conformity batch certificate and Class A in individual work certificate which is printed in amber colour which fuses into the glass . Each pipette is accompanied with a batch or individual certificate in the pack you can also download the certificate from our website : www.glasscolabs.in and by scanning the QR Code from the label of the box. Below is the overview of the one mark pipette explaining in detail the content printed on it.
Volumetric Pipettes, 1 mark, Class AS
- With Individual Certificate
- Compliance with ISO 648 Standard
- Comes in amber colour enamel printing
Volumetric Pipettes 1 mark, Class AS
- Compliance with USP standard
- With Individual Certificate
- With Batch Certificate
- Complies with DIN ISO 648 Standard
- Printed in amber colour
- Volumetric Pipettes, 2 mark, Class AS
- Compliance with DIN ISO 648 Standard
- Printed in Amber Colour
- With Batch Certificate
Graduated Pipette (Serological), CLASS-A, UNSERIALIZED
- Calibrated to deliver as per ASTM E-1044 Standard
- Printed in amber colour enamel
- With Batch certificate
Graduated Pipettes (Mohr), CLASS-A, SERIALIZED
- Calibrated to deliver as per ASTM E 1293 Standard
- Printed in Amber colour enamel
- With Individual work Certificate
Graduated Pipettes (Mohr), CLASS A UNSERIALIZED
- Calibrated to deliver as per ASTM E 1293 Standard
- Printed in amber colour enamel
- With Batch certificate
- Pipette Volumetric, Class-A, Unserialized
- Made from ASTM E-438, TYPE-1, B0R0 3.3 GLASS
- Complies with ASTM E-969 standard
- Printed in amber colour
- With Batch certificate
- Pipette Volumetric, Class-A, Serialized
- Made from ASTM E-438, TYPE-1, B0R0 3.3 GLASS
- Complies with ASTM E-969 standard
- Printed in amber colour
- With individual work certificate
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With batch certificate
Graduated Pipettes Type 3 (Serological), Class AS
• Compliance with ISO 835 Standard • With batch certificate
Graduated Pipettes Type 3 (Serological), Class AS
• Compliance with ISO 835 Standard • Comes with individual work certificate
- Pipette Volumetric, Class-B
- These Pipettes are manufactured from ASTM E-438, TYPE-1, CLASS-A, BORO 3.3 GLASS
- Compliance to ASTM E-969, Standard
- Comes in amber colour enamel printing
- Graduated Pipette (Serological), CLASS-A, SERIALIZED
- Calibrated to deliver as per ASTM E-1044 Standard
- Printed in amber colour enamel
- With individual work certificate
Graduated Pipettes Type 3 (Serological), Class AS
- Compliance with USP Standard
- With batch certificate
Graduated Pipette (Serological), CLASS-AS
• Calibrated to deliver in compliance with USP Standard • Printed in amber colour enamel • With Individual work certificate
Graduated Pipettes (Mohr), CLASS-B
- Calibrated to deliver as per ASTM E 1293 standard
- Printed in amber colour
- Graduated Pipette (Serological), CLASS-B
- Calibrated to deliver as per ASTM E-1044 Standard
- Printed in amber colour enamel
Graduated Pipettes Type 1 (Mohr), Class AS
- As per DIN ISO 835 Standard
- With Individual work Certificate
- Printed in amber colour
- Pipette Box
- Made of Polypropylene
- This Pipette Box is designed is such a way that it can hold Pipettes of different lengths
- The top of the box screws on the bot tom and the height can be adjusted by screwing the top.
Pipette Controller- Can fill 25 ml pipette under 4 seconds
- Safety valve and hydrophobic filters provide double protection against fluid penetration
- Two different speed modes - High & Low along with Gravity drain
- The pump speed can also be fine-tuned by varying finger pressure on operating knobs for better control of speed
- Cadmium free environment friendly NiMH batteries
- Batteries can be changed very easily by the user
- The intelligent charger prevents over charging / heating of batteries
- Low battery indicator
- The specially designed Desk top Stand enables the Pipette Controller to be charged while resting on it.
- The Pipette Controller can hold the serological pipette while resting on Desk top Stand.
Technical Data:Power : 2 x 1.2 V / 1000 mAh NiMH batteries Battery Service Life : Eight hours continuous use Battery Charging Time : 2 - 3 hours to charge fully Volumetric Range : Plastic or Glass pipette from 0.1 ml up to 200 ml Safety System : Replaceable hydrophobic 0.45 pm PTFE filter Safety check valve Standard Accessory : Battery charger (UK plug) : Desktop Stand : Hydrophobic PTFE membrane filter 0.45 μm 1Pc : Hydrophobic PTFE membrane filter 0.20 μm 1Pc : Wall mounting stand with screw - Presenting a fast release pipetting device for precise pipetting & zip quick emptying
- The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying
- The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes
- It resists acids & alkalies and can be easily disassembled for thorough cleaning. Material : Acrylonitrile Butandiene Styrene
- Pipette Stand (94 Pipettes- Rotary)
- This unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette
- The lower rotating disc has four concentric troughs with tapered sides and open bot tom which cradle the pipette tips protectively and permit water drops to run of f
- The upper disc has a grid pat tern concentric with the bot tom disc and keeps the pipettes vertical
- Liquids draining of f the pipettes are retained on the top of the stationary base by the outer ring
- This stand can be easily disassembled & reassembled.
- Pipette Stand (Horizontal)
- This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position
- This autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene
- This stand can be easily disassembled for space saving storage.
- Pipette Stand (Vertical)
- This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm
- The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base
- The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipettes tips rest and liquids drain down to the base
- These discs can be adjusted on the rod according to the length of the pipette
- The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
- A normal pressure on the bulb permits the intake of the required quantity
- Used for repeated sampling
- Pipettes, Bacteriological, Graduated
- Used for the bacteriological examination of milk
- 1.1 ml is graduated at 0.5 and 1.1 ml
- 2.2 ml is graduated at 1.0, 2.0, 2.1 and 2.2 ml
Pipettes, Gerber, Milk (New)
- Used for testing milk by the Gerber method.
- Are one-mark transfer Pipet tes for measuring 10.75 ml
- Also be used in rural Milk Collection Centres
Pipettes
