Soil Tester Archives

DIGITAL INSTANT N-P-K TESTER

₹50,000.00

For Soil Testing The electro-chemical method uses the innovative technology of ionization reduction Operating Instruction

Take off the protective cap from the metal probe
Press OFF/ON button Tester display “0".
Quick testing: Water the soil with distilled water before testing. Make sure the water can go 10 cm deep at the least. The best humidity is 60%-80%. Insert the metal probe into the soil vertically and clockwise, to about 6-8 cm deep. Make sure the soil have thorough contact with the metal probe. After about 6 seconds, the tester will display the measured value. The tightness of soil will affect the measuring result. Multiple tests at the same and different points should be performed and take the average as the Final result. Accurate testing: use a container, mix dried water at the rate of 3:1. Stir and make it into a mud form. Put the metal probe into the mud about 6-8 cm deep. In about 6 seconds, the tester will display the measured value.
Wipe the metal probe with a towel or tissue paper after each test. Make it clean and dry. till the display shows “0".

Technical Specification (6 Position):

Range	: 0-1999 mg/Kg(mg/l)
Resolution	: 1mg/kg(mg/l)
Accuracy	: ± 0.2 F.S.
Operating Temp	: 5-45 °C (41-113°F) /ATC
Calibration	: Factory calibrated
Power supply	: DC 9V (9V580/6F22Ni-MH rechargeable battery)
Display	: LCD with backlight
Dimension	: Æ50.5 x 250 mm
Probe length	: 140mm
Features	: Auto switch off in about 5 minutes
Weight	: 390 Gms (Approx)
IP Class	: 64

View Cart

Select options / Details Quick View

For Soil Testing The tester features with innovative nanotechnology metal material sensor, for fast and easy test of pH value of soil, fruit, meat, cheese and other semi-solid media. Operating Instruction

Take off the protective cap from metal probe
Press OFF/ON button. Tester displays "7.00".
Insert the metal probe vertically into the sample that requires testing, at least 6-8cm deep. Make sure there is close contact(Soil need to humid~60%-80%). The tester will start testing automatically. After about 1 minute the test is over. Indication light will be on for about 10 seconds. The displayed number is locked, which is the value of pH.
After each test, take out the tester, wipe the metal probe clean with towel or tissue paper. Display will be unlocked, and show “7.00". It is ready for a newtest.
After use, wipe the metal probe clean until it displays "7.00". Switch off the tester.

Technical Specification :

Range	: pH: 3.0-14.0 pH
Resolution	: 0.10 pH
Accuracy	: ± 0.2 pH(3.0-12.0 pH )
Operating Temp	: 5-45 °C
Calibration	: 1 point (Factory calibrated -No more calibration)
Power supply	: DC 9V(L1022 battery)
Display	: LCD
Dimension	: Æ50.5 x 250 mm
Probe length	: 140mm
Features	: Automatic detection of data and lock to keep,automatic switch to OFF in 5 minutes (or manual shutdown).
Weight	: 110 Gms (Approx)
IP Class	: 64

View Cart

Select options / Details Quick View

DIGITAL SOIL EC TESTER

₹30,000.00

Digital Soil EC Tester The tester features a unique metal surface electrode that provides fast and easy on the spot EC(mS/cm) measurements for soil and hydroponics nutrient etc. Operating Instruction

Take off the protective cap from the metal probe
Press OFF/ON button Tester display “0".
Quick testing: Water the soil with distilled water before testing. Make sure the water can go 10 cm deep at the least. The best humidity is 60%-80%. Insert the metal probe into the soil vertically and clockwise, to about 6-8 cm deep. Make sure the soil have thorough contact with the metal probe. After about 6 seconds, the tester will display the measured value. The tightness of soil will affect the measuring result. Multiple tests at the same and different points should be performed and take the average as the final result. Accurate testing: Use a container, mix dried soil with distilled water at the rate of 10:1. Stir and make it into a mud form. Put the metal probe into the mud about 6-8CM deep. In about 6 seconds, the tester will display the measured value.
Wipe the metal probe with a towel or tissue paper after each test. Make it clean and dry. till the display shows “0".

Technical Specification (6 Position):

Range	: 0-1999 EC(mS/cm);
Resolution	: 0.10 EC(mS/cm)
Accuracy	: ± 0.1EC (00-100 EC)
Operating Temp	: 5-45°C (41 - 113°FVATC
Calibration	: 1 point (6.7EC /Factory calibrated -No more calibration)
Power supply	: DC 9V(L1022 battery)
Display	: LCD with illumination
Dimension	: Æ50.5 x 250 mm
Probe length	: 140mm
Features	: Automatic switch-off function: After about 5 minutes without pushing buttons, the meter will be switched off automatically (or manual shutdown)
Weight	: 110 Gms (Approx)
IP Class	: 64

Soil Tester

Soil Tester

DIGITAL INSTANT N-P-K TESTER

DIGITAL pH TESTER

DIGITAL SOIL EC TESTER

Title