Material : Polypropylene, Autoclavable
-
- Made from Low Density Polyethylene and are therefore translucent & unbreakable
- The distinguishing feature that these bottles contain is the built in delivery tubemaking it a one piece Wash Bottle
- These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed
-
• Made from Low Density Polyethylene which gives these bottles a translucent & unbreakable character • Solutions can be poured easily by squeezing the bottle lightly • The cap is fit ted with a flexible polyethylene delivery tube which can be aimed wherever required
-
- Blown in Polypropylene, are strong, unbreakable and have good contact clarity.
- These autoclavable flasks are provided with screw caps to prevent leakage.
- Material : Polypropylene
-
- Made of Polypropylene
- Have polypropylene cap with built in seal ring making it a leak proof vial
- Used for the storage of biological material, animal & human cells etc
-
- Made of Polypropylene
- Economical substitute for wire racks
- Are autoclavable and stackable when empty
- Available in dif ferent colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water
- Easily disassembling for cleaning purpose
- Base is in the form of a grid with square openings and has fold up sides and end bars that lock in to rack tops
-
A handy, lit tle, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm. dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 ver tical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. Material : Polypropylene
  -
- Made of Polypropylene
- Ingenious racks with 3-Tier design provide clear view of the tube contents
- Convenient inser ting & removal of tubes
- Every par t of raw is coloured & opaque
- Are autoclavable and withstand sub-freezing temperatures
-
• Made of Polycarbonate • Ingenious racks with 3-Tier design provide clear view of the tube contents • Convenient inser ting & removal of tubes • Every par t of raw is coloured & opaque • Are autoclavable and withstand sub-freezing temperatures • Has transparent upper & middle plates where plates
-
this autoclavable stand is perhaps the most commonly used Test Tube Stand in various laboratories. For bet ter visibility, this 6 place rack is end suppor ted by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six ver tical pins for drying tubes. Material : Polypropylene
 -
• Made of Polypropylene • Are autoclavable and non-corrosive • Ideal for rinsing & draining glassware • Useful for storage of test tubes or culture tubes during sterilization or incrubation
 
-
- Made of Polypropylene
- Useful for stirring different solutions in the laboratory
- Are tough and long lasting
-
- Made of Polypropylene
- Provides excellent contact clarity & Strength
- Is per shaped & autoclavable
- has leakproof screw cap threadded
- PP stopcock fitted with self lubricating PTFE plug, is push fitted to the stem of funnels
-
- Made of Polypropylene
- Non-corrosive front opening provides clear view of the solution, Allows unobstructed placement of separating funnels.
- Two tapped wedges ensures firm grip on rods having dia 1/2" or 3/5"
-
- Made from Polyethylene
- Unbreakable vials are fitted with leakproof screw caps
- These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count
-
• Made from HDPE Amber • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leakproof
-
• Made from HDPE • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the HDPE bottle too have excellent strength and are unbreakable • The HDPE Cap has a built in seal ring to make these bottles leakproof
-
• Made from Polypropylene • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leak-proof
-
• Made from Polypropylene • The PP bottles are rigid, translucent and have excellent contact clarity • These bottles can be autoclaved filled as well as empty • On the other hand, the Polyethylene bottle too have excellent strength and are unbreakable • The Polypropylene Cap has a built in seal ring to make these bottles leakproof
-
Â
- Made from Polypropylene
- Autoclavable & corrosion resistant
- There is an individual rack for both 8 ml. & 20 ml. vials
- These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations
-
- Made of Polycarbonate
- Autoclavable
- Made for holding twenty four 1.5 ml. micro centrifuge tubes
- Unique stacking feature prevents movement in any direction
- Holes are numbered & lettered for easy identification.
-
- Made of Polypropylene
- Used for transferring powdered reagent
- Unique parallel stem minimizes bridging of powder
- Autoclavable at 120° C
-
Pipette Stand (Vertical)
- This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm
- The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base
- The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipettes tips rest and liquids drain down to the base
- These discs can be adjusted on the rod according to the length of the pipette
- The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
-
Pipette Stand (94 Pipettes- Rotary)
- This unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette
- The lower rotating disc has four concentric troughs with tapered sides and open bot tom which cradle the pipette tips protectively and permit water drops to run of f
- The upper disc has a grid pat tern concentric with the bot tom disc and keeps the pipettes vertical
- Liquids draining of f the pipettes are retained on the top of the stationary base by the outer ring
- This stand can be easily disassembled & reassembled.
-
Pipette Box
- Made of Polypropylene
- This Pipette Box is designed is such a way that it can hold Pipettes of different lengths
- The top of the box screws on the bot tom and the height can be adjusted by screwing the top.
-
- These Petri Dishes are clear, unbreakable & Autoclavable
- Made from polypropylene
-
- Made of Polypropylene & Polycarbonate
- Used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate
- Middle portion is made of polypropylene
- Tube holding spaces are uniformly placed so as to facilitate the use of multi pipettes
- Racks can be stacked together to save shelf space
-
-
- Made of Polypropylene
- Built in plugs make these tubes leakproof
- Used for transmit ting sample for micro analysis
-
- Made from Polypropylene
- These jugs are clear & autoclavable
- Provided with a handle for easy & convenient lifting
- Raised graduation for easy reading
-
- Moulded in Polypropylene
- These autoclavable cylinders have raised prominent graduations
- Easy reading and have excellent contact clarity
- The broad base provides good stability
-
- Made from Polypropylene
- These are now available with hexagonal base also
- The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really while pouring any reagent
-
Â
• Made from Polypropylene • Twin Purpose Rack for both 0.5 ml & 1.5 ml. micro centrifuge tubes • Each side has 108 holes for 0.5 & 1.5 ml. MCT’S, respectively • Transparent top provides an excellent view as well as a protection cover for the tubes stored • Each face of the base has a unique alpha-numeric index for easy identification of the tube -
are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCT’S of 1.5 ml. & and the other can hold 100 MCT’s of 0.5 ml.. These boxes are designed to work at temperatures ranging from -190°C to +121°C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control. Material : Polycarbonate
 -
- Fully autoclavable & Stackable
- Hinge rack allows single hand operation
- Color coded tray for Easy identification
- Free from DNase, RNase, Human DNA, Pyrogen & PCR inhibitor
-
- Made of Polypropylene
- Used for convenient filling of carboy's, drums & barrels
-
- Made of Polypropylene
- 600 cone angle and external ribs to prevent air lock
- can also be steam autoclaved
-
- Made of Polypropylene
- Light weight
- Easy to clean & autoclavable
- Top portion snap fitted with the lower one forms a vaccum seal which requires no greasing
- Base of the top portion has perforated filter plate
 
Plasticware
